Change Over Time Lapse


Momentum Specifications

Main rotary turret

  • 8-station
  • Fixture centerline diameter:  48”

Speed

  • Design speed:  200/min
    • 25 rev/min = 1 rev/2.4 sec
  • Guaranteed speed:  180/min
    • 22.5 rev/min = 1 rev/2.7 sec

Change Over

  • 30 min max (trained operator)
  • No-tool change parts exchange
  • Color coded per sku
  • Change part storage

Canister Infeed

  • Single file
  • 1-lane
  • Vertical (upright) orientation

Rolled Product Infeed

  • Single file
  • 2-lanes
  • Horizontal (laying down) orientation

Product Size

  • Canister outside dia.:  3.0” to 6.0”
  • Canister height:  6.0” – 9.0”
  • Rolled product diameter:  2.5” – 5.5”
  • Rolled product height:  5.5” – 8.25”
  • NOTE: If rolls are larger than canister neck opening it must be compressible to allow it to pass through the funnel with a maximum force of 5 pounds.

Drive

  • Main drive (1): Nord electronic speed adjustable helical bevel gear unit.
  • Lube-less chain
  • Chute conveyor drives (2):  90V DC gearmotors

Controls

  • Allen Bradley Motion Control System
  • Nema 12 enclosure
  • Flanged disconnect switch attached to the Stuffer frame

 

Stuffing Assemblies

  • Pneumatic cylinders: PHD, 1.12” bore, 0.50” rod dia., 16.0” (14” usable) stroke, lube-less
  • Pneumatic valves: SMC, mechanically actuated, trigged by center cam
  • Rotary union air distribution

Guarding

  • Fully enclosed
  • Polycarbonate panels
  • Hinged doors: Non-locking guard door switches with Safety Relay

Construction & Paint

  • Mild steel
  • Powder Coat
    • Standard, RAL9016 Traffic White
    • Option, RAL7006 White Aluminum
    • Special, per customer specification
  • Stainless Steel option

Infeed Height

  • Canisters:  35.0”
  • Rolled product:  63.0” (based on 35” infeed height, 28” offset)

Discharge Height

  • Filled canister:  35.0”

Sensing

  • Rolled product backlog, 3/lane (high, med, low) if distance permits
  • Canister presence – infeed dial
  • Stuffing cylinder extended/retracted – to be confirmed
  • Filled canister and partial stuff detect at discharge
  • Pneumatic cull device

Utilities

  • Power:  460V – 3 phase
  • Air supply:  2.5 cfm @ 60 psi  (actual 2.24 @180/min)

Optional Equipment

  • Rolled product Laner
  • Incoming empty canister pressure-less Single Filer
  • Full canister discharge Accumulation Table

Is your head spinning yet? Have a question? Give us a call.